Cycle Forums: Motorcycle and Sportbikes Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
183 Posts
Discussion Starter · #1 ·
I have a 95 GSXR600F. The clutch works fine and feels OK.

Although it requires more force to squeeze then other clutches I have felt on some newer bikes.

I want to get in the habit of using 2 fingers on the clutch, but it is to hard to squeeze, especially after a couple of miles of riding.


Is there anything I can do to make the clutch easier to squeeze?


Please advise. Thanks
 

·
Registered
Joined
·
781 Posts
Have you lubed the cable lately????


If you haven't, you'll be pleasantly surprised at the change.

Scott :)
 

·
Registered
Joined
·
781 Posts
Get some silicone spray, and shoot it into the gap near the lever where the cable goes past the adjuster. Cycle the lever a bunch of times to help carry the lube down.

Scott :)
 

·
Hoof Hearted
Joined
·
2,820 Posts
The clutch on my katana was always hard to pull. Even when I put a new cable on it was a tight pull.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top