Cycle Forums: Motorcycle and Sportbikes Forum banner
1 - 19 of 19 Posts

·
THA STUNNA WIT DA MOST RIDEZZZ
Joined
·
2,474 Posts
Discussion Starter · #10 ·
you saw them this mornuing around 9-11. j-nasty and i started on them at noon and worked all day and then i took the pics. why u followin me? STALKER.
 

·
High Drag - Low Speed
Joined
·
753 Posts
Here is some of the goodies on the bike I told you about Rob ...

02 Triumph Daytona (double side swingarm model) all stock including all of the street stock parts .. except for the following-

> GMD reworked stock forks with Race Tech springs
> 8100 Penske Shock
> M4 Slip-on muffler
> LSL Steering Damper
> EBC HH front brake pads
> Half used set of Pirelli DOT supercorsa tires
> Tuneboy program & cable
> K&N Air Filter
> 520 chain conversion kit with AFAM aluminum rear sprocket
> Sky King frame and tail section sliders
> Vortex clip-ons
> Custom made fiberglass bellypan
> Extra stock rear wheel with rotor and cush drive

All the engine parts have been kept together. The top end has been dis-assembled. It will need a new middle con-rod and valves plus a new head. they made the assumption that the crankshaft needs replaced. They haven't checked the bottom end of the motor yet so...?

All for about $2K ..and your thoughts?


<a href='http://www.smileycentral.com/?partner=ZSzeb008_ZNxdm41490US' target='_blank'><img src='http://smileys.smileycentral.com/cat/5/5_1_116.gif' alt='Rave' border=0></a>
 

·
THA STUNNA WIT DA MOST RIDEZZZ
Joined
·
2,474 Posts
Discussion Starter · #12 ·
i would buy it if it were me. use all thge parts and make yourself a trick daytona and then ebay whats left. the goodies that you listed are worth at least 2k i would say. as far as the motor, id buy a crate engine from a salvagfe yard for like $700 if you wanted.
just my thoughts
rob
 

·
THA STUNNA WIT DA MOST RIDEZZZ
Joined
·
2,474 Posts
Discussion Starter · #14 ·
i have access to a bender. well, first, what are you bending? exhaust? steel tubing? what application?
thanks
rob
 

·
Registered
Joined
·
3,161 Posts
Rob, need an extra gixxer 600 motor??? i have a whole one with wiring harness, ECU, and speedo lying around the shop.
 

·
Registered
Joined
·
1,277 Posts
steel thin wall pipe 1/2 to 5/8 I really don't know what size I'm going to use. Thanks
 

·
Registered
Joined
·
1,277 Posts
AND WHILE I GOT YOU TALKING WHAT ARE YOU DOING FRIDAY MID DAY? IF YOU WERE GOING TO BE HOME I WOULD LIKE TO BRING THE DR OUT AND LITTLE BRO ON THE WR TO SEE HOW THE GEARING WILL WORK ON THE TRACK. THAT IS IF YOUR GOING TO BE AROUND.
 

·
THA STUNNA WIT DA MOST RIDEZZZ
Joined
·
2,474 Posts
Discussion Starter · #18 ·
actually if you want to play, tomorrow would be best. ill see how friday looks in the morning. i know you are gonna bring those 2 pocket bikes i saw in the pic. remember beulah international raceway will be the site of our national sunday
rob
 

·
Registered
Joined
·
1,277 Posts
SEE NOW THAT IS A PROBELM, SOME PEOPLE HAVE REAL JOBS ,MONDAY TO FRIDAY 7TO5. SO CAN'T TOMORROW BUT OFF FRIDAY, BUT THATS OK IF NOT FRIDAY. I'LL JUST GO RIDE UP IN ALABAMA . THOSE POCKET BIKES ARE THE CHEAP ONES JUST ELECTRIC NOT THE GOOD ONES . BUT I DO HAVE THREE OF THEM . JUST LET ME KNOW ROB AND THANKS
 
1 - 19 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top